Pages: [1]   Go Down
« previous next »
Print
Author Topic: VR v6 flex plate  (Read 7736 times)
0 Members and 1 Guest are viewing this topic.
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« on: October 13, 2011, 05:45:29 AM »
 Needed ASAP a vr v6 flex plate in good condition!!!(obviously auto) if anyone has one and can part with it i will pay cash/beer or what ever,pm me contact details. Cheers Damo
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #1 on: November 12, 2011, 04:17:39 AM »
still needing this!!!vp and vr or even vn series 2 are all the same if anyone is wrecking one of these let me know!!if there is some one out there that has no idea what it is, it is the fly wheel(the circular disc with gear teeth in between the converter and the engine)
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
88vys
Club Member
of WCC
*
Gender: Male
Posts: 97
« Reply #2 on: November 13, 2011, 04:15:58 AM »
Is yours destroyed? need to be careful with these as my vr had been fitted with a vp gearbox and it was causing it to shear the flex plates off the crank did 3 in a year cost 900 in parts and labour to replace them each time
Logged
15.8 itll go faster
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #3 on: December 09, 2011, 08:18:18 AM »
Mine is still a goer but is rattling its head off when there is no load on the driveline,i still really need one before it goes, so if any one has a vp or vr series 2 that they are wrecking i will pay cash or beer or what ever,even if you have a series 2 engined car that u will sell complete for a couple hundred will be good,even better!let me know!!!!cheers Damo
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
aka_n0j
Club Member
of WCC
*
Posts: 1600
« Reply #4 on: December 10, 2011, 01:36:46 AM »
did you find out if it was a 6 or 8 bolt one?
Logged
VT V6 TTB's w/-Baby Baby Cam NOW ON NOS = 12.76sec ? Mile
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #5 on: December 10, 2011, 02:35:51 AM »
nah, i havent jon,its still in the car,but looking at a few sites they mainly say that its a 8 bolt,what did that series 1 vn that you had have?that would have been a 6 bolt,thats what my s1 vn has
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
aka_n0j
Club Member
of WCC
*
Posts: 1600
« Reply #6 on: December 10, 2011, 02:38:40 PM »
Yeah mate was a six bolt
Logged
VT V6 TTB's w/-Baby Baby Cam NOW ON NOS = 12.76sec ? Mile
88vys
Club Member
of WCC
*
Gender: Male
Posts: 97
« Reply #7 on: December 12, 2011, 03:39:13 AM »
1st time this has happened?
Logged
15.8 itll go faster
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #8 on: December 22, 2011, 04:32:26 AM »
Quote from: 88vys on December 12, 2011, 03:39:13 AM
1st time this has happened?
Yeah mate,first time,thing is its a standard car that is driven by my mrs so its not hammered as she has the kids with her 9 times out of 10,probably why its still going!!but i do still NEED one so its all good for them
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
88vys
Club Member
of WCC
*
Gender: Male
Posts: 97
« Reply #9 on: December 22, 2011, 11:57:25 PM »
Been under the car and checked nothing funny like a vp gearbox in it? which was what was causing mine, if you could do without the car for a few days i could possibly weld it up BUT no gaurente that it would be any good from memory to have a mechanic replace it your looking at about the $900 mark for the whole job can probably obtain a whole vr for that kinda money and strip it out and then on sell the parts to recoop some of the cost
Logged
15.8 itll go faster
aka_n0j
Club Member
of WCC
*
Posts: 1600
« Reply #10 on: December 23, 2011, 01:57:59 AM »
Is it Eco or Buick? Forgot?
Logged
VT V6 TTB's w/-Baby Baby Cam NOW ON NOS = 12.76sec ? Mile
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #11 on: December 24, 2011, 06:40:59 AM »
Quote from: aka_n0j on December 23, 2011, 01:57:59 AM
Is it Eco or Buick? Forgot?
its a series 2 buick jon

Quote from: 88vys on December 22, 2011, 11:57:25 PM
Been under the car and checked nothing funny like a vp gearbox in it? which was what was causing mine, if you could do without the car for a few days i could possibly weld it up BUT no gaurente that it would be any good from memory to have a mechanic replace it your looking at about the $900 mark for the whole job can probably obtain a whole vr for that kinda money and strip it out and then on sell the parts to recoop some of the cost
yeah mate i put the box in from a vr wreck i had at the time,well i am willing to get a wreck if i have to,so if ya know anyone,let me know cheers
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
aka_n0j
Club Member
of WCC
*
Posts: 1600
« Reply #12 on: December 24, 2011, 01:01:51 PM »
i have a 8 bolt one from a eco here??
Logged
VT V6 TTB's w/-Baby Baby Cam NOW ON NOS = 12.76sec ? Mile
vn_t5_6
Club Member
of WCC
*
Gender: Male
Posts: 120
« Reply #13 on: December 28, 2011, 01:45:18 AM »
no good jon, the holden part number is different between the eco and buick series 2 and series 1 is obviously different again,i think the eco and s2 are different diameter or amount of teeth,or offset etc
Logged
1990 vn 5 speed v6, pb of 14.1 @ 95mph 1/4 mile for now will go quicker.

1981 vh v6 buick project, full manual auto,spool and nitrous
aka_n0j
Club Member
of WCC
*
Posts: 1600
« Reply #14 on: December 28, 2011, 01:54:10 AM »
No worries man... Sounds like I have not what you need.
Logged
VT V6 TTB's w/-Baby Baby Cam NOW ON NOS = 12.76sec ? Mile
Pages: [1]   Go Up
Print
« previous next »
Jump to:  

TinyPortal v1.0 beta 4 © Bloc